How To Change Macbook Keyboard Colour? Best Ideas In 2022

Are you looking for How To Change Macbook Keyboard Colour? You have reached the right spot, then. This “How-To” is intended for those of you who would like to change the backlight’s colour on your MacBook Pro. Although it is a time-consuming process, the result is well worth it!

This guide will show you How To Change Macbook Keyboard Colour? The inversion of the colours on the screen can help people with visual impairments or difficulty reading text on the screen when using Apple’s standard colour scheme to make the screen easier to read.

Read also: How To Get User Arl Code Deezer? Amazing Ideas In 2022

How To Change Macbook Keyboard Colour?

Time to get this party I started!

How To Change Macbook Keyboard Colour?
How To Change Macbook Keyboard Colour?

Supplies

Spudger with Phillips #00 Screwdriver (Not Required)
T6 Torx Screwdriver is a type of screwdriver that has a hexagonal head.

Y1 Screwdriver with three winglets (Not Required)

Transparent coloured plastic/colour gel in a variety of colours

Check to see that the colourizer you choose is thin, transparent, and can withstand a small amount of heat before using it. Color Gel, which is commonly used for stage lighting, was used in this project (copped it from a local news station I used to work at). It can withstand high temperatures while remaining thin and transparent enough to allow a reasonable amount of light through.

If you’re interested in learning more about stage lighting, you can visit this website, www.stagelightingstore.com, or look for some in your area. However, if you don’t have access to that, you can purchase some transparent, coloured plastic from a local craft store to substitute. It should be able to function correctly.

Step 1: Remove the backplate from the machine

Turn the computer over and remove the backplate by unscrewing it. Overall, there are ten screws in the assembly, with three of them being significantly longer than the rest. Keep track of the screws and make a note of where they go; the screws must be replaced in the same holes from which they were removed.
Pull the backplate away from the computer with care and set it aside for the time being.

You may read: What Are Holy Panda Switches? Best Review In 2022

Step 1.5: Disconnect the battery from the computer

How To Change Macbook Keyboard Colour?
How To Change Macbook Keyboard Colour?

Although this step is not required, we recommend that you complete it.

When you look in the lower right-hand corner of the logic board, you will see a rectangular connector that is black to the right of the RAM. Using the flat end of the spudger, carefully disconnect the battery connection by removing the connector from its socket (don’t worry, you will not be electrocuted during this process).

It is entirely up to you whether or not you want to go the extra mile and remove the battery. To take it out, you’ll need a tri-wing screwdriver.

Step 2: Disconnect the display from the computer

A plastic pull tab can be found in the upper right-hand corner of the logic board’s circuit board.

To unlock the connection, grab the pull tab and pull it towards the DC-in side of the computer.

Take care not to damage the display connector as you carefully pull it towards the right side of the computer, removing it from the socket.

Step 3: Take Away The Display Bracket

The display connection is held in place by a bracket located in the upper right-hand corner of the computer, which you can see if you follow it through the computer.

Remove the two Phillips screws (you’re still keeping track of your screws, aren’t you?) and set them aside for now.

Remove the bracket from the wall and set it aside.

Step 4: Disconnect the speaker connection from the computer

Just below the fan is a connection that sends a cable to the left-hand corner of the computer, which is located directly below. This is the connection for the speakers and subwoofer.

Remove the connector from its socket with the help of the spudger. Be cautious, as these connections are delicate and should be handled with care!

Also read: How To Fix Amazon Echo Dot Blue Ring Of Death? Amazing Ideas In 2022

Step 5: Disconnect the hard drive, DVD drive, and trackpad from the computer

How To Change Macbook Keyboard Colour?
How To Change Macbook Keyboard Colour?

Connections with this appearance (shiny, flat and black) are distinguished from other types of relationships. They are all grouped in the lower left-hand corner of the logic board, right next to each other.

Using the flat end of a spudger, carefully pull these connections upward to release them.

Step 6: Disconnect the camera from the computer

The camera connection is located near the subwoofer connection, on the right side of the optical (DVD) drive, and is easily accessible.

This is a delicate connection, so proceed with caution!

Pulling the cable towards the DVD drive will cause it to be removed out of its socket.

To prevent damage to the cable or socket during reassembly, please make sure this socket is aligned with the connector before connecting them.

Step 7: Withdraw the Keyboard Ribbon Cable from the ZIF Socket

How To Change Macbook Keyboard Colour?
How To Change Macbook Keyboard Colour?

Immediately to the right of the trackpad connection are a ribbon cable that emerges from beneath the logic board and curls up into a loop.

Lift the lock with your fingernail or the sharp end of a spudger, taking care not to damage the lock (it rotates towards you).

Pulling the ribbon cable in the direction of your body will disengage it from the ZIF socket.

Step 8: Disconnect the Backlight Connector

On the right-hand side of the keyboard ribbon cable, you will notice a small strip of black tape. This is where the keyboard ribbon cable is attached—allowing the backlight connection to be revealed by gently peeling this off.

As this connection is so tiny, it necessitates extra care.

Gently lift the flap on the ZIF socket to reveal the ZIF socket (same deal as the keyboard ZIF, only much smaller).

Remove the backlight ribbon cable from the ZIF socket by gently pulling it out.

Step 9: Disconnect the Battery Indicator Cable from the battery

A small black connector is located to the right of the battery connection, and it is similar in appearance to the DVD and rugged drive connectors.

Gentle prying upwards and towards you will yield the best results. Removing it from the socket is a simple process.

A small microphone can be found in the upper right-hand corner of the logic board, close to the display socket, on the logic board.

Remove the microphone from the adhesive with a spudger, and lift it away from the logic board with a spudger.

Remove the logic board’s screws one at a time, keeping track of where they came from. They have to be replaced in the exact location!
There are a total of nine screws in this set.

Step 10: Disconnect the DVD Drive

It’s time to take everything apart now that everything has been loosening up.

Remove the DVD drive by unscrewing it. There are two small Phillips screws near the left-hand edge of the computer and one on the right-hand side of the DVD drive that you can use to secure the computer together.

Remove the drive from the computer with care.

Remove the logic board from the computer with care.

Step 11: Remove the Black Protective Film

Gently peel back the black film, careful not to lose track of how it goes.
Lift the plastic from under the black film (it should have small rectangular holes).

You might read: How To Cast Zoom To TV From Laptop? Amazing Ideas In 2022

Step 12: Preparation of the Colorizer

Place the colourizer over the plastic sheet and draw a line through the small rectangular holes to indicate where they are located.
Make these slits in the wall.
The rectangular holes in your colourizer should now be in the exact locations as the rectangular holes in the backing plastic for the keyboard.

Step 13: Put everything back together

Now that the colourizer has been installed, it is time to put your Macbook back together. To accomplish this, reverse the steps outlined above.

Congratulations! It’s all finished!

Visual Guide For How To Change Macbook Keyboard Colour?

Final Words:

The most important thing to remember while doing this is to be patient. If you aren’t careful, nitpicky, and downright vaginal, it could spell the end of your computer’s life.

Thank you for reading, and if you have any comments or suggestions, please post them in the comments section below!

Default image
Wilson M. Stewart
I am a technology writer with an education in journalism. I have spent the past seven years writing about all sorts of tech topics, from games to gadgets to software and more.
Articles: 53

Leave a Reply

Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124